Super-hard matrial cubic press is the equipment that offering pressure and temperature needed for synthesis of superhard material, which produce ultra-high pressure through hydraukic system and high temperature through high-power current. it is also the equipment widely used in national superhard material industry.our company cubic hydraulic press, with independent intellectual property right, is developed on the base of independent innovation, by which in China over 90%of synthetic diamond is produced. our Super-hard material cubic hydraulic press can form 4-6Gpa,up to 2000ºC ultra high pressure, high temperature environment within 100cm³ area of the cell. it is the equipment which is widely usedin producing super-hard material, researching high pressure physics, limiting material and geophysics. our Super-hard material cubic hydraulic press model and specification as following form.
Main technology specification: NOTE:ZZ--Casting
Main technology specification: NOTE:ZZ--Casting
NO | Item | Unit | CS-XIII(ZZ) 6×62MN |
|
1 | Design pressure | Single cylinder | KN | 62000 |
Six cylinder | KN | 372000 | ||
2 | Design pressure | High pressure | MPa | 14.3 |
Super-high pressure | MPa | 110 | ||
3 | Diameter of cylinder | mm | φ850 | |
4 | Maximum piston stroke | mm | 100 | |
5 | Pressure increasing ratio of Booster(Vessel) | L | 7.7:1 (45L) |
|
Maximum stroke of booster | mm | 545 | ||
6 | Opening Height | mm | 326 | |
Closing height | mm | 226 | ||
7 | Overall dimension (L×W×H) | mm | 3425×3425×4056 | |
Total weight | t | 87 |